基于塑性铰理论的车身概念设计正碰分析与优化方法

在概念设计阶段,车身碰撞安全性能评价是一个难点问题,需要详细的结构模型,本文基于塑性铰理论提出采用梁单元简化模型对框架车身进行概念设计阶段的耐撞性评估和优化设计方法。首先,介绍了关于箱型截面薄壁梁弯曲特性研究的理论模型与计算过程,接着赋予梁单元塑性铰的特性,模拟薄壁梁变形,再对框架车身进行了碰撞仿真。将仿真结果与详细模型对比,以分析简化模型的精度及可靠性。最后,以此为基础对框架车身进行耐撞性优化。结果表明,该简化模型易于创建,且有较高的精度,可用于概念设计阶段梁结构的设计工作。     

低碳钢塑性变形量磁评定法研究

针对塑性变形量评定的局限问题,基于铁磁材料塑性变形致位错在不同方向分布不同的现象,研究了磁测法在定量评定低碳钢塑性变形量方面的应用前景。实验以工程中常用的低碳钢Q195钢板为测试材料,制作了形状尺寸一致的一批试件,并对其进行了不同程度的塑性变形量加载。通过搭建的磁化检测系统,采用相同强度及频率的正弦波激励,对所有样品进行了不同方向的磁化;同时经线圈及隧道磁敏电阻(TMR)采集了每次磁化的磁化曲线,提取了磁化曲线特征参数,对比了其与塑性变形量的定量关系。结果表明:随着塑性变形量的增加,铁磁钢材在同一磁场强度下产生的磁感应强度也会变大;沿主塑性变形方向磁化时,磁滞消耗能量最少,沿主塑性变形垂直方向磁化时,磁滞消耗的能量最多;磁路内磁场在主塑性变形方向上对塑变量的变化最敏感,而磁路外磁场在主塑变垂直方向上对塑变量的变化最敏感。实现了铁磁材料磁特征参数与塑性变形量的定量关联。本研究为开发简捷的铁磁材料塑性变形量无损评定磁方法奠定了基础。     

纤维复合材料界面横向拉伸分析

以单纤维十字型横向拉伸试验为研究对象,对纤维/基体界面采用弹性-软化双线性内聚力模型,建立了纤维复合材料在横向拉伸作用下界面法向失效过程的解析模型。得到了沿纤维/基体圆周界面的法向应力分布,纤维/基体界面的状态与界面承载力和单纤维复合材料承载力的关系,以及内聚力参数和试件几何尺寸对它们的影响。结果表明:纤维/基体圆周界面在脱粘前经历全部弹性及弹性+软化两种状态;当界面为弹性状态时,界面法向应力随界面强度线性增加;当界面为弹性+软化状态时,界面软化范围随界面裂纹萌生位移的增加而增大;界面初始脱粘位置与拉伸荷载方向重合;界面初始脱粘时的界面承载力随界面强度及界面裂纹萌生位移的增加而增加,随界面裂纹生成位移的增加而降低;单纤维复合材料的脱粘荷载受基体截面尺寸的影响,当纤维体积含量相同时,沿荷载方向截面尺寸的增大对提高脱粘荷载更显著。     

手机虹膜识别镜头设计

随着近年来图像传感器的快速商用化以及生物识别算法的发展，虹膜识别功能得以应用于移动终端设备。获取虹膜图像是虹膜识别的关键一步，运用ZEMAX光学设计软件设计了一款适用于手机的虹膜识别镜头。该镜头采用豪威科技公司OmniVision_OV2281传感器，采用三片式非球面光学塑料设计，F数为2.3，全视场角为34°，在1/2奈奎斯特频率220 lp/mm处MTF值均大于0.39，且系统总长仅3 mm。根据ZEMAX像质评价方法以及公差分析结果可知，该镜头各项光学指标优良，具有像质好、体积小，质量轻、价格低、容易加工等特点。     

Geometric dynamic recrystallization of austenitic stainless steel through linear plane-strain machining

ABSTRACT

Type 316L austenitic stainless steel was severely plastically deformed at room temperature using linear plane-strain machining in a single pass that imparted shear strains up to 2.2 at strain rates up to 2?×?10³ s^?1. The resulting microstructures exhibited significant grain size refinement and improved mechanical strength where geometric dynamic recrystallization was identified as the primary microstructural recrystallization mechanism active at high strain rates. This mechanism is rarely observed in low to medium stacking fault energy materials. The critical stress required for twin initiation is raised by the combined effects of refined grain size and the increase in stacking fault energy due to the adiabatic heating of the chip, thus permitting geometric dynamic recrystallization. The suppression of martensite formation was observed and is correlated to the significant adiabatic heating and mechanical stabilisation of the austenitic stainless steel. A gradient of the amount of strain induced martensite formed from the surface towards the interior of the chip. As the strain rate is increased from 4?×?10² s^?1–2?×?10³ s^?1, a grain morphology change was observed from a population of grains with a high fraction of irregular shaped grains to one dominated by elongated grain shapes with a microstructure characterised by an enhanced density of intragranular sub-cell structure, serrated grain boundaries, and no observable twins. As strain rates were increased, the combination of reduction in strain induced martensite and non-uniform intragranular strain led to grain softening where a Hall-Petch relationship was observed with a negative strengthening coefficient of ?0.08?MPa m^1/2.     

A mode split,Godunov‐type model for nonhydrostatic,free surface flow

A previously developed model for nonhydrostatic, free surface flow is redesigned to improve computational efficiency without sacrificing accuracy. Both models solve the Reynolds averaged Navier–Stokes equations in a fractional step manner with the pressure split into hydrostatic and nonhydrostatic components. The hydrostatic equations are first solved with an approximate Riemann solver. The hydrostatic solution is then corrected by including the nonhydrostatic pressure and requiring the velocity field to obey the incompressibility constraint. The original model requires the solution of a Riemann problem at every cell face for each vertical layer of cells, which is computationally expensive. The redesigned model instead solves the shallow water (long wave) equations for the hydrostatic solution. Vertical shear is computed by subtracting the shallow water equations from the full three dimensional equations, which removes the hydrostatic thrust terms. Therefore, the required fluxes may be more efficiently computed with velocity based upwind differencing rather than solving a Riemann problem in each vertical layer of cells. This approach is termed mode splitting and has been used in hydrostatic coastal and ocean circulation models, but not surf zone models. Numerical predictions are compared with analytical solutions and experimental data to show that the mode split model is as accurate as the original model, but requires significantly less computational effort especially for large numbers of cell layers. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.     

Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites

The structural-phase state of the contact zone and the factors that influence on the strength of diamond retention in the diamond carbide composites were determined. Composites were obtained by the new hybrid technology that eliminates the reheating of the metalized coating. The elaborated technology combines the thermal diffusion metallization of a diamond and the sintering by the scheme of self-dosed impregnation in a one-stage technological cycle. By the methods of electron microscopy, X-ray diffraction analysis, and Raman spectroscopy the structural and phase characteristics of the interphase boundary were investigated. The improvement of chemical and mechanical adhesion between the diamond and carbide matrix was obtained. It was shown that the specific productivity of the samples with a metalized diamond component is 39% higher than those without metallization.     

pH对毛细管电泳分离多肽的影响

设计了一个针对高年级本科生的毛细管电泳分离实验，用以研究pH对生物小分子多肽分离的影响。5种多肽包括Bradykinin、[Hyp3]-bradykinin、Angiotensin I、Leucine Enkephalin和[Met5]-Enkaphalin，被用于毛细管电泳的分离实验。研究了毛细管电泳生物分析实验中最重要的2个因素即电渗流和样品吸附随pH的变化以及对于分离的影响。在pH=10的条件下，酸性多肽几乎没有吸附，少量的碱性多肽有吸附。在pH=6的条件下，碱性多肽具有非常强的吸附从而导致非常差的分离效果，在pH=2.3的条件下，5种多肽都能被很好地分离，由于多肽此时都带有正电荷因此几乎没有吸附。而在此pH，电渗流消失。对具有一定分析化学基础理论知识的学生而言，这是一个非常好的生物分析实验，有助于学生充分理解相关环境因素对仪器分析的重要影响。     

A finite volume cell‐centered Lagrangian hydrodynamics approach for solids in general unstructured grids

A finite volume cell‐centered Lagrangian hydrodynamics approach, formulated in Cartesian frame, is presented for solving elasto‐plastic response of solids in general unstructured grids. Because solid materials can sustain significant shear deformation, evolution equations for stress and strain fields are solved in addition to mass, momentum, and energy conservation laws. The total stress is split into deviatoric shear stress and dilatational components. The dilatational response of the material is modeled using the Mie‐Grüneisen equation of state. A predicted trial elastic deviatoric stress state is evolved assuming a pure elastic deformation in accordance with the hypo‐elastic stress‐strain relation. The evolution equations are advanced in time by constructing vertex velocity and corner traction force vectors using multi‐dimensional Riemann solutions erected at mesh vertices. Conservation of momentum and total energy along with the increase in entropy principle are invoked for computing these quantities at the vertices. Final state of deviatoric stress is effected via radial return algorithm based on the J‐2 von Mises yield condition. The scheme presented in this work is second‐order accurate both in space and time. The suitability of the scheme is evinced by solving one‐ and two‐dimensional benchmark problems both in structured grids and in unstructured grids with polygonal cells. Copyright © 2013 John Wiley & Sons, Ltd.